1. Description

Photogrammetry is a technique that enables the generation of 2D and 3D models from a dataset of geotagged images. This process involves analyzing images of a subject taken from various angles and distances to create a digital model of it.

2. Workflow

Step 1 - Open a project. 

Step 2 - From the "Analytics" tab, in the "COMPUTING TOOL" section, click on "Photogrammetry".

Step 3 - Click on "LAUNCH".

Step 4 - Consult and update the parameters if necessary. Parameters are detailed in the Paragraph 3.

Step 5 - Click on "LAUNCH MAPPING".

Step 6 - The Photogrammetry is launched. Click on "FINISH"

3. Information and Parameters

3.1 Processing estimations

Information about the number of images, processed pixels, and processing time.

3.2 My profile

In this section, you can define the execution mode, the processing engine, the settings and the processing area. 

Execution mode:

Whatever the processing engine, you can choose between 2 execution modes: self-service or advanced. 

• Self Service: photogrammetry is launched and results are published automatically, without the assistance or quality check of an Alteia production member.
• Advanced: photogrammetry is handled by an Alteia production member, who controls the results manually before publishing them on Aether.

Processing engine and settings:

By default, photogrammetry is set to the most common and widely used settings. However, it is important to note that these settings may not always be the most appropriate for your specific needs. Therefore, it is recommended that you take the time to review and adjust the settings to ensure the best possible results for your project. 

For a more detailed understanding of the photogrammetry engines and options, we recommend that you refer to the article Photogrammetry Engines and Options.‍ 

Note that it's possible to define photogrammetry presets at Project and Company level. 

3.3 Outputs generated

The output generated from the photogrammetry process will be defined by default based on the type of sensor used to capture the photos (RGB, multispectral, thermal sensors). 

In the case of a multispectral camera, additional indices can be selected.

If needed, suffixes can be added to the output names.

In addition, a photogrammetry accuracy report is generated. Please refer to Photogrammetry Accuracy Report to get more details on how to access to this report and a description of its content. 

3.4 Photogrammetry CRS

The Platform suggests a CRS for photogrammetry outputs, but it can be changed to fit the project needs (refer to Coordinate Reference Systems (CRS)).

3.5 Reflectance Calibration (multispectral)

If calibration needs to be processed manually, click on "Manual radiometry of the calibration target".

Cases where manual reflectance calibration is necessary:

• Automated calibration failed during the first attempt (refer to Calibration Verification for Reflectance Map).‍ 
• The calibration target is an old model (ref <RP04 for Micasence).
• Following a recommendation from Alteia Support.

3.6 GCP

If you have placed and measured ground control points (GCPs) before the flight, click on the “USE GCP” and drag and drop your GCP file.

For more detailed information about uploading, tagging or re-using existing GCP files, please read the dedicated article here‍.

4. Results

After processing, the photogrammetry outputs are available in Data Studio 2D and 3D modes. Here are some examples:

• Orthomosaic

• DSM

• Point cloud

• 3D Model

5. Setting photogrammetry presets

According to your business, you may require only one engine on a daily basis. It is possible to define your preferred Photogrammetry Engine as a preset for the Company‍ (with all its projects) or within a certain Project‍.

5.1. For an existing Project

Step 1 - Open a Project and select Show project info from the top bar drop-down menu

Step 2 - In the right panel, go to the "PHOTOGRAMMETRY PRESETS" section and click on "CREATE":

Step 3 - A pop-up will open with the photogrammetry settings. Adjust the settings (description given in section 6 below) and then click SAVE.

The information panel displays a message indicating that presets are being applied and lists the selected options.

This preset could be updated anytime later.

5.2. For an entire Company

Company Managers‍ have administration rights allowing them to define the settings that will apply across all managed Projects, per Company.

Step 1 - At the bottom of the left panel, press Administration icon.

Step 2 - Click on "Companies" (1) and select the company on the list (2), for which you want to adjust the photogrammetry default settings.

Step 3 - Click on "CUSTOMIZE PRESET" in the Photogrammetry settings section.

Step 4 - A pop-up will open with the photogrammetry settings. Adjust the settings (description given in section 6 below) and then click SAVE.